Regency G51 UltraGlow
15
OPTIONAL
BRICK PANELS
1)
Remove screen door, if used.
2)
Carefully unwrap the brick panels from the
protective wrapping.
NOTE: The logs must not be in the unit.
3)
Insert the back brick panel first by carefully
slipping it between the back wall of the
firebox and rear log brackets.
4)
Slide the side panels in from the front and
push them flat up against the wall. Be very
careful not to scratch them on the firebox
hardware.
5)
Install the brick retaining clips, one on each
side to secure the side brick panels in
place.
INSTALLATION
OPTIONAL
FINISHING TRIM
1)
Fit the left side finishing trim onto the firebox
by sliding the cut-outs on the finishing trim
through the screws on the side of the
firebox.
Once trim is fitted in place, secure by
tightening the 2 screws. Repeat for right
side.
2)
Fit top finishing trim onto firebox. Ensure
cut-outs in trim lineup with screws on
firebox.
Secure in place by tightening the 3 screws
once fitted in place.
Left Side
F i n i s h i n g
Trim
Top Finishing Trim
6)
Re-install screen door, if used.
