background image

Regency Freestanding Woodstove

12

FACTORY

BUILT CHIMNEY

When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed. You must also purchase and install the 
ceiling support package or wall pass-through and "T" section package, fi restops (where needed), insulation shield, roof fl ashing, chimney cap, etc. 
Maintain proper clearance to the structure as recommended by the manufacturer. The chimney must be the required height above the roof or other 
obstructions for safety and proper draft operation. The space heater is to be connected to a factory-built chimney conforming to CAN/ULC-S629, 
Standard for 650

0

C Factory-Built Chimneys.

MASONRY

CHIMNEY

Ensure that a masonry chimney meets the mini-
mum standards of the National Fire Protection 
Association (NFPA) by having it inspected by 
a professional. Make sure there are no cracks, 
loose mortar or other signs of deterioration and 
blockage. Have the chimney cleaned before 
the stove is installed and operated. When 
connecting the stove through a combustible 
wall to a masonry chimney, special methods 
are needed.

Ensure that an effective vapour barrier at the 
location where the chimney or other component 
penetrates to the exterior of the structure.

MASONRY

FIREPLACE

There are listed kits available to connect a stove 
to a masonry fi replace. The kit is an adapter 
that is installed at the location of the fi replace 
damper. The existing damper may have to be 
removed to allow installation.

Ensure that an effective vapour barrier at the 
location where the chimney or other component 
penetrates to the exterior of the structure.

Liner

Listed

When referencing installation or connec-
tion to masonry fi replaces or chimneys, the 
masonry construction must or shall be code 
complying.

When referencing installation or connec-
tion to masonry fi replaces or chimneys, the 
masonry construction must or shall be code 
complying.

INSTALLATION

Summary of Contents for Classic F1100





























Reviews: