Regency Fireplace Products ACC40E City Series Owners & Installation Manual Download Page 29 | Manualshive

Page: 29 / 88

background image

City Series ACC40E

|

29

installation

Wall Board/Plasterboard Installation

WARNING!

Risk of Fire! Comply with all minimum clearances to combustibles as specified.

Finishing Instructions
It is important to follow the framing and finishing instructions to ensure proper placement of fireplace into the surrounding framing/finishing materials.
Wall board materials 13mm thick are specified in this installation manual to properly align with the optional finishing methods offered with this appliance. The
ACC40LE/ACC40RE may be finished to the appliance opening with 13mm thick plasterboardl.
• Ensure that the back and side clearances are maintained.

WARNING!

Risk of Fire! Maintain specified air space clearances to combustibles. Inadequate air space could cause overheating and fire.

DO NOT

use screws more than 20 mm length on the lower access cover panel. Longer screws may penetrate gas line or damage valve or electrical components.

Note:

It is acceptable to use a high temperature silicone sealant to adhere plasterboard to lower access cover panel.

The appliance is designed to be used with 13mm wall sheathing materials such as drywall, plywood, wood composites, or non-combustible materials.
Thicker materials may be used. Refer to facing and finishing details in this manual.

Facing Material
• Facing and/or finishing materials must never overhang into the glass opening.
• Facing materials may be combustible or non-combustible

WARNING!

Risk of Fire! DO NOT apply combustible materials beyond the minimum clearances. Comply with all minimum clearances to combustibles as

specified in this manual. Overlapping materials could ignite and will interfere with proper operation.

PAINTING

If desired finishing includes a painted wall, 100% acrylic latex, oil-based or standard acrylic paints may be used.
Follow paint manufacturer’s instructions for paint and primer application.

99mm

73mm

76mm

25mm

30mm

22mm

25mm

25mm

99mm

[73mm]

76mm

30mm

25mm

22mm

25mm

25mm

ACC40LE - screws in shaded area only

ACC40RE - screws in shaded area only

«
...
27
28
29
30
31
...
»

Summary of Contents for ACC40E City Series

























































































Reviews:

No comments

Related manuals for ACC40E City Series

Brand: Valor Pages: 49

Brand: Valor Pages: 4

Brand: Vermont Castings Pages: 24

Brand: Osburn Pages: 48

Imperial Carousel

Brand: Malm Fireplaces Pages: 8

Brand: Evonic Fires Pages: 44

Brand: Kingsman Pages: 17

Fireplace Xtrordinair 864 Deluxe

Brand: Travis Industries Pages: 7

Brand: SAN HIMA Pages: 7

Brand: Enviro Pages: 60

Brand: Kooper Pages: 12

Brand: UBERHAUS DESIGN Pages: 9

Brand: Pacific energy Pages: 44

Brand: IHP Pages: 2

MAJESTIC ODGSR36ANAU

Brand: Raypak Pages: 20

Brand: Ravelli Pages: 100

Brand: UrbanFire Pages: 20

Brand: Heat&Glo Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands