Regal 35 Sport Coupe, Owner'S Manual

Page: 132 / 214

34
Chapter 7
Typical Control
Behind Icemaker
Valve
DECK WINDOWS (LOWER DECK)
AVOID BODILY INJURY!
DO NOT STEP ON WINDOW SURFACES
AS THEY MAY BE SLIPPERY AND
COULD CAUSE A FALL.
COCKPIT ICEMAKER
The cockpit icemaker is
installed as optional equip-
ment. On initial use make
sure the water inlet valve
is turned to the “on” po-
sition. The inlet water
valve is located behind
the icemaker. Remove the
4 screws holding the ice-
maker unit and carefully
slide it forward to gain
access. Secondary access
to the icemaker is through
the seat storage aft of the
icemaker.
Make sure the icemaker
breaker is activated on the
main AC control panel.
Energize the on/off switch.
Find the temperature con-
trol knob. Turn it clock-
wise for colder operation
and counterclockwise for
warmer temperatures. Adjust the control knob a few times
to arrive at the desired temperature.
Doorstop-
Locked Position
CABIN DOOR/DRAIN
The cabin door features a lock
and recessed screen door.
Keep the cabin door completely
closed when the boat is moving.
When docked, the cabin entry
door can be held open by flip-
ping the door stop 180 degrees.
This will prohibit the door from
accidentally closing, a great feature with children on board.
To use the screen door, slide it into position and latch.
It features a fine screen to detour insects but yet a large
enough screen grid to promote cross ventilation. To provide
the greatest seal protection, close screen and entrance doors
when leaving your vessel.
Outside the cabin entrance door there is a fiberglass step
screwed in place. Periodically check the drain for debris.