Reflex Marine FROG-6 HC6-01 620, User Manual

Page: 79 / 97

User Manual FROG-6
UM-0007-REV.06 Page 79
11 APPENDIX C – PARTS LIST AND MATERIAL SPECIFICATIONS
11.1 Parts
Due to the number of parts and revisions in the FROG-6 we have decided to omit the most current
parts listing from this User Manual. Please refer to
Appendix B to assist in identifying your
requirements, however for the most up to date and accurate identification of parts please contact
our operations department at
support@reflexmarine.com .
11.2 Definition According to Criticality
Critical components are those in which, if failure were to occur, there would be a high risk to the
safety of the passengers in the FROG-6. The critical components are all connected to the Main
Support Tube, which is the prime structural component in the design.
11.3 Fastener Specifications
Because of corrosion considerations, all fasteners on the FROG-6 are supplied in stainless steel
suitable for marine use. All nuts and bolts must be Grade A4 or A2. All nuts should be fitted with
NYLOC inserts where applicable.
11.4 Certification
Certification Supplied is identified with the following letters:
MC - Material Certificate
CC - Certificate of Conformance
LTC - Load test Certificate
NDE - Non-Destructive Examination Report