Reflex Marine FROG-6 HC6-01 620, User Manual

Page: 55 / 97

User Manual FROG-6
UM-0007-REV.06 Page 55
6.12 Guidelines for Stocking of new units
These guidelines are for the stocking of new units and parts before they are put into service. These guidelines are NOT applicable to units and parts that
have already been put into service.
Type
In Stock
Inspection
Release Inspection Additional Certification Shelf Life Actions
Transfer
capsules
Yearly visual
inspection.
Less than 2 years old
visual inspection
Older than two years
visual inspection, load
test and post load test
inspection
1. New inspection date to be stamped
on inspection data plate
2. Visual inspection checklist to be
completed
3. For units older than two years the
new load test date should be
stamped onto the inspection data
plate and a new load test certificate
issued.
5 Years
1. Remove lifting assembly
2. Place lifting assembly into dry storage
3. Ensure the unit is chocked up off its feet, stored in a
secure area away from the risk of damage and
protected from exposure to the elements
4. Update certification pack with new lifting assembly
information if original sling is not being used.
5. Update the certificate pack with all new certification
documents, including load test and examination
certificates.
Wire rope
lifting
assembly
Visual – Every
6 months
Thorough Examination
1. Re-validated Certificate, indicating
next inspection date
2. Certificate of thorough examination
should be issued.
2 Years
1. Keep off the ground in dry and ventilated storage
area with the lifting assembly cover removed.
Other
replacement
Parts (not
slings)
None Visual Inspection Not Required
Unit
Lifetime
1. Keep in clean dry storage