45
Setting Rear Axle Camber:
For setting the camber, turn the upper wishbone (A).
Because the upper wishbone has a left and right hand
thread at either end, the wishbone does not need to
be dismantled for the camber to be adjusted
Twist the hexagon with a suitable open-end wrench.
In the axle spur there are several more suspension
points (B) for the upper wishbone. When the wheel
rebounds, the camber changes depending on the in-
stallation position (e.g. stronger camber when the
wheel is pushed in).
Figure 3
A
B
Summary of Contents for 23 73 00
Page 118: ...118 ...
Page 119: ...119 ...
