55
12. Checking the model functions
a) Checking the rudder functions
First start running the transmitter then the model.
Important!
But do not yet press the release button for the engine function (see Fig. 7a, Pos. 6)!
Neutral position
If the two control sticks for the rudder function (see ill. 2, pos. 3 and 10) as well as the corresponding trim sliders (see
ill. 2, pos. 4 and 9) are in the central position, the rudders should also be exactly in center position.
If necessary, the twisting of the respective fork heads can result in elongating the rods so that the rudder can be
adjusted with millimetre precision.
Figure 18
Elevator function
If the control rod for the elevator function (see ill. 2, pos. 10) is moved down, the elevator must break out to the top.
In flight, the landing gear is pressed downwards and the model ascends.
Figure 19a
Summary of Contents for 20 55 11
Page 130: ...130 ...
Page 131: ...131 ...
