REED ST-5500 Instruction Manual Download Page 4

reedinstruments

www

com

Specifications

General Specifications

Environment conditions

•  Installation Categories II
•  Pollution Degree 2
•  Altitude up to 2000 meters
•  Indoor use only
•  Relatively humidity 80% max.
•  Operation Ambient 0~40ºC

Maintenance & Cleaning

•  Repairs or servicing not covered in this manual should only be 

.

performed by qualified personnel.

•  Periodically wipe the case with a dry cloth. Do not use abrasives or 

solvents on this instruments.

Display:  

Large LCD with dual display 

Measurement Range:  

200Ω, 200kΩ, 200MΩ/250V, 200MΩ/500V,

.

 

2000MΩ/1000V, 750V/ACV, 1000V/DCV.

Sampling Rate:        

2.5 times per second.

Zero Adjustment:      

Automatic adjustment.

Over Range Indicator:   Number 1 of highest digit is displayed.
Low Battery Indication:   The 

 is displayed when the battery voltage 

.

 

drops below the operating voltage.

Operating Temperature:   0ºC to 40ºC (32ºF to 104ºF) 

.

 

and Humidity below 80% RH

Storage Temperature:  

-10ºC to 60ºC (14ºF to 140ºF) 

.

 

and Humidity below 70% RH

Power source:  

DC 9V (6 x 1.5V Size “AA” battery or equivalent)

Dimensions:   

200(L) x 92(W) x 50(H) mm

Weight:        

Approx 700g including the batteries

Contents:  

Test leads, 6 batteries, 

.

 

carrying case and manual

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Summary of Contents for ST-5500











Reviews: