14
6. Press and hold the button to set the recording start time.
7. Use the and buttons to adjust the current date as indicated
by "dd".
8. Press the
FUNC.
button to confirm selection and switch to the hour
digit as indicated by "h".
9. Use the and buttons until the desired number value is reached.
10. Press the
FUNC.
button to confirm selection and switch to the
minutes digit as indicated by "m".
11. Use the and buttons until the desired number value is reached.
12. Press the
ENTER
button to save your selection and skip to the
recording end time parameter as indicated by "END" on the LCD.
13. Repeat steps 6 through 10 to set the recording end time.
14. Press the
ENTER
button to save your selection and return to the
main screen.
Note:
Make sure you have enough memory to complete your noise survey
(see
Clear Stored Data in Setup Mode
section for details).
15. The meter can be placed in a pant or shirt pocket.
16. Clip the microphone as close as possible to the user's ear
i.e. shirt collar.
Note:
Set the cable in a way that does not hinder the user's ability to
perform their tasks.
17. Press and hold the
LOG
button to enter automatic data logging
mode for SPL recordings as indicated by "LOGGER" on the LCD.
18. Press the
RUN/PAUSE
button to activate the programmed start and
end times.
19. The keypad will automatically lock and the meter will start measuring
once the programmed start time is reached.
20. When started, "DUR" will flash on the LCD display confirming
programmed testing has begun while "LOGGER" will flash every time
a SPL reading is stored at the user selected sampling rate.
21. To pause a recording, first unlock the keypad by pressing the
FUNC.
and
ENTER
buttons simultaneously and then press the
RUN/PAUSE
button. The pause icon will appear confirming testing is now
paused while both the DUR and LOGGER icons will
stop flashing.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
