17
3. Once the appropriate parameter has been selected follow the
associated instructions below.
Note:
The meter automatically exits out of the Setup mode if no key is
pressed within 7 seconds.
Setting the Time and Date (dAtE)
1. Press the
ENTER
button when the dAtE parameter appears on
the LCD.
2. Use the and buttons to adjust the year as indicated by "YY".
3. Press the
ENTER
button to confirm selection.
4. Repeat steps 2 and 3 for month, day, hour, minute and seconds as
indicated by (mm./dd/h./m./s).
5. After each value has been selected and confirmed, it will
automatically skip to the next parameter.
Note:
At any time, you can press the ESC button to exit the Setup mode
and resume normal operation. The internal clock will keep accurate time
when the meter is powered off. When new batteries are installed the clock
will have to be reset.
Setting the Data Logging Sampling Rate (SP-t)
Follow steps 1 and 2 when "SP-t" appears on the LCD.
1. Use the and buttons to adjust the sampling rate between 0, 1,
2, 5, 10, 30, 60, 120, 300, 600, 1800, and 3600 seconds.
2. Press the
ENTER
button to confirm selection and skip to
next parameter.
Note:
At any time, you can press the ESC button to exit the Setup mode
and resume normal operation.
Enabling/Disabling Auto Power OFF (PoFF)
Follow steps 1 and 2 when "PoFF" appears on the LCD.
1. Use the and buttons to select between ON (enabled) or OFF
(disabled). With the Auto Power OFF feature enabled, the meter will
automatically switch OFF after 10 minutes of inactivity to preserve
battery life.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
