16
4. To exit manual data logging mode, press and hold the
LOG
button
for 2 seconds to resume normal operation.
SPL Automatic Data Logging Mode
In automatic mode, the desired data logging sampling rate is set to 1, 2,
5, 10, 30, 60, 120, 300, 600, 1800 or 3600 seconds prior to recording.
In order to setup the meter for automatic data logging, follow steps 1
through 5 below.
1. Press and hold the
LOG
button to enter automatic data
logging mode.
2. The "LOGGER" will flash every time a reading is stored at the user
selected sampling rate.
3. To pause the data logging session press the
LOG
button and
LOGGER will stop flashing.
4. To resume press the
LOG
button again.
5. To end the current data logging session, press and hold the
LOG
button for 2 seconds to resume normal operation.
Setup Mode
1. Press and hold the
FUNC.
button for 2 seconds to enter
Setup Mode.
2. Press the
FUNC.
button continuously to scroll through the
following parameters.
Parameter
Description
dAtE
Set the time and date
SP-t
Set the data logging sampling rate
PoFF
Enable or disable the auto-power off
SEt LC
Set Criterion level in dB
SEt LT
Set Threshold in dB
SEt ER
Set Exchange rate in dB
SPC
Check Memory space
CLrE
Clear Stored Data
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
