background image

7

The ray types you can measure are as follows: 
•  Gamma rays only as indicated by the y symbol on the ray selection switch. 

Note:

 With the switch in gamma rays position, an aluminium plate screens 

the counter tube window against alpha and beta rays.
•  Gamma and Beta rays as indicated by the ß + y symbols on the ray 

selection switch.

Note:

 With the switch in the gamma and beta rays position an aluminium 

foil now screens the counter tube window against alpha rays. 
•  Alpha, Beta and Gamma rays as indicated by the 

α

 + ß + y symbols on 

the ray selection switch. 

Note:

 With the switch in the alpha, gamma and beta rays position the 

counter tube window is now open to all three types of rays.

Backlight

When the meter is on, press the 

 button to activate or deactivate the 

LCD backlight. The backlight will automatically turn off after 1 minute. 

Unit Conversion for Dose Rate

When the meter is powered ON the default unit of measurement is set to 
μSv/h. Press the 

 button to convert the unit of measurement to mRem/h.

Note:

 The conversion is based on the formula: 10μSv/h = 1mRem/h.

Dose Accumulation Rate

The absorbed dose is the radiation energy absorbed per unit mass 

of human tissue and organs and is calculated in Sv or mSv.

1.  Press the 

SV

 button to enter the infinite dose accumulation mode, 

and the icon "μSv" will appear on the display. This mode calculates 
the dose accumulation rate for no set amount of time.

2.  To enter the timed dose accumulation mode press the 

SV

 button a 

second time.

Note:

 The default set time is 60 minutes. To modify the set time, refer to 

Setting Timed Dose Accumulation

.

continued...

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Summary of Contents for R8008

















Reviews: