9
Pulse Counting
This meter can be used as a geiger counter, displaying received cumulative
pulses on the LCD. In this mode the meter will only record received pulses
and calculated pulses, which will not be converted to Sv.
1. Press the
button to activate "Pulse Counting" mode as
indicated by cps (Pulse/Second) on the LCD display.
2. Press the
button again to switch from cps (Pulse/Second) to
cpm (Pulse/Minute).
3.
Press the
button a third time to resume "Pulse Counting" mode for
no set amount of time while the
icon will appear on the LCD display.
4. Press the
button a fourth time to enter "Pulse Counting Time"
mode. The
and icons will appear on the LCD display.
Note:
The default set time is 60 minutes. To modify the set time, refer to
Setting Dose Accumulation Time
for details.
5. Throughout the measurement process, the icon will blink on the
LCD display.
6. The meter will beep when the set time is up and the cumulative pulse
count value will appear on the screen.
Note:
The meter can only record up to 4000 pulses.
7.
At any time, you can press the
button to end the timed pulse count.
8. Press the
button again to return to the CPS function.
9. Press the
button a fifth time to stop pulse counting and press it
once more to return to "CPS Pulse Counting" mode.
Note:
At any time, you can press the
ESC
or UNIT buttons to exit the
"Dose Accumulation" mode and resume normal operation.
Data Storage
1. When taking a measurement, press the
SAVE
button to enter the
data storage mode.
2. The data storage
icon will appear on the LCD display.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
