15
Formatting the SD Card (Sd F)
Follow steps 1 through 5 when "Sd F" appears on the LCD.
1.
Press the and buttons to select "YES" to format the card. Select
"nO" to abort.
2. Press the
ENTER
button to confirm selection.
3. Press the
ENTER
button again to re-confirm.
4. The meter will format the SD card and automatically return to the
Setup menu when formatting is complete.
5. Press the
ESC
button to exit the Setup mode and resume
normal operation.
Note:
It is recommended that new SD cards be formatted prior to first
use. if the formatting process fails, the meter will display "-E-".
Verify Set Time and Date
During normal operation press the
TiME CHECK button to display the
year, month, day, hour and minutes.
Verify Sampling Rate
During normal operation, press the SAMPLinG CHECK button to view the
selected sampling rate.
Data Logging
Data Recording Modes
Manual Data Logging:
Press the
LOG
button to manually log up to 99
readings on a SD memory card (see
Manual Data Logging Mode
for details).
Automatic Data Logging:
Setup the meter parameters in order to
automatically log data on a SD memory card. The number of data points
is limited by the size of the memory card.
Note:
it is recommended to use a class 4 SDHC memory card between 1Gb
and 16Gb. insert the SD memory card in the slot at the bottom of the meter.
The card must be inserted with the label side facing the rear of the meter.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
