Minnow Logger
Quick Reference Guide
Senonics LLC
www.senonics.com [email protected] [email protected]
Revision 1.0.6
Senonics LLC
©
1/6
MINNOW LOGGER
Quick Reference Guide
(Minnow 1.0T & Minnow 1.0TH)
Description
The Minnow Logger is a portable, battery operated,
temperature and humidity data logger able to store 65,520
samples of both temperature and humidity along with a time
stamp. The Minnow Logger runs off of a CR2450 coin cell
battery that enables it to run for over 4 years.
This Quick Reference Guide gets you started with the logger
with the most basic functions to have you up and running with
your logger in a matter of minutes.
The Minnow product today comes in two versions; Minnow
1.0T is a temperature only version and Minnow 1.0TH is a
temperature and humidity logger. This quick reference guide
applies for both versions.
Battery Installation
The Minnow logger runs from a standard coin cell battery. We recommend a CR2450 620mAH Coin cell
battery. There are different manufacturers but a good one is Panasonic CR-2450/G1AN. You can find it
easily on the web from different places such as
local supermarket. The key thing is to choose a CR2450 battery with high capacity since this will translate
into a longer logger battery life.
First remove the Minnow cover by unscrewing the two fastener screws (#1 Philips) at the rear of the logger.
