PowerLift
by ReechCraft
38
Discharged Battery or Loss of Power
1.
If the battery of the drill should run out of charge or if there is a loss of
power to the corded drill before the platform has fully descended.
2. Remove the drill and place it inside the platform.
3. Remove the manual descent crank from the mounting clip inside the
platform.
4. Engage the drive shaft with the manual crank.
5. Push down on the top of the handle to disengage the drive shaft brake
and wind counterclockwise until the platform lowers fully.
(See Figure 4-1)
Figure 4-1
Manual descent crank operation
Push down,
then rotate
counter-clockwise
Mount
Clip
SECTION
4
EMERGENCY PROCEDURES
Summary of Contents for PowerLift PL53
