Reechcraft PowerLift PL53, Operators Safety Manual

Page: 22 / 60

PowerLift
by ReechCraft
22
5. Gearbox - Check for any oil leaks and make sure the Drive Shaft Brake is
functioning properly by pressing down on the hex shaft. The hex shaft
should return to the up position freely without excessive side movement.
6. Swivel Casters - Check for any debris stuck to or around the wheels
or swivel mechanism. Check to be sure the lock is in good working
condition and that the wheels are functioning properly.
7. Track Sections - Check that the teeth of all the track sections are
not excessively worn (5 mm tooth remaining), bent, misshapen or
missing. (See Figure 2.4)
SECTION
2
PREPARATION & INSPECTION
Figure 2-4 - Maximum Track Wear
Figure 2-5 - Location of Manual Decent Crank
5 mm
Manual
Descent
Crank