Reechcraft PowerLift PL53, Operators Safety Manual

Page: 17 / 60

www.reechcraft.com/powerlift
888-600-6160
17
2.2
Preparation, Inspection & Maintenance
SECTION
2
PREPARATION & INSPECTION
Pre-Start Inspection
The Pre-Start Inspection should include each of the following:
1. Cleanliness - Check all surfaces for leakage, debris or foreign objects.
2. Decals and Placards - Check for cleanliness and legibility. Make sure
none of the decals or placards are missing. Make sure all illegible
decals are cleaned or replaced. (Reference Section 5.2 Decal Contents
and Location)
3. Safety, Service - Make sure a copy of the Operator’s and Safety
manual is enclosed in a weather resistant container.
4. Set-Up - Make sure the machine is set-up in accordance with Section 3.4.
5. Walk-Around Inspection - Refer to Section 2.3.
6. Drill Selection Criteria - Refer to Section 3.2.
7. Function Check - Once the Walk-Around Inspection is complete,
perform a function check of all systems in an area free of all over-
head or ground level obstructions. Refer to Section 2.4 for additional
information.