6
Any revisions must first be approved by the product designer. Version: 201808
Revision By: JST
15.
DOOR INSTALLATION
Hinges should be in the closed position
(in line) before attempt in to install the
glass door.
Slide the door into the hinges. Centre the
door between the side panels and tighten
the hinge bolts firmly with the 4mm hex
key supplied.
ENSURE HINGES ARE CLEAR FROM SIDES
OF GLASS CUTOUTS AND HINGE BOLTS
ARE FINALLY TIGHTENED AS MUCH AS
POSSIBLE.
REFIT COVER PLATE
Place the cover
plate over the
hinge body as
shown. Refit
cover plate
with a 1.5mm
hex key.
DOOR REALIGNMENT
Use 3mm hex key
to loosen the cap
screws near the,
align the door to
desired position
and then re-
tighten.
16.
DOOR
CLEARANCE
Summary of Contents for Atlantis Glacier SFK-GL-HR
Page 1: ...SFK GL HR...
