X-IP-SERIES USER MANUAL
4
3.1
REDVISION IP POWER SUPPLY (RVIP-PSU)
3.1.1
SUPPLY VOLTAGE
3.1.1.1
INPUT VOLTAGE
Mains input :110V/230V @ 0.5A
3.1.1.2
OUTPUT VOLTAGE
Output @ Camera connector : 24Vdc @ 3A nominal
3.1.2
RVIP-PSU INTERNAL CONNECTIONS
3.1.2.1
MAINS POWER INPUT
NOTE: Earth connection requires 4mm red spade loop (supplied with PSU) to be fitted by engineer at installation.
SAFETY: ENSURE MAINS INPUT & EARTH CONNECTIONS ARE SECURELY STRAIN RELIEVED.
PCB IDENT
MAINS POWER
*
LIVE
LIVE (BROWN) 110/230Vac Connection via 2 way terminal block
*
NEUTRAL
NEUTRAL (BLUE) Connection via 2 way terminal block
*
EARTH
GREEN/YELLOW Connection via terminal screw
WIRE COLOUR
SIGNAL
PSU CONNECTOR PIN NO.
1
Orange
Camera TxN - Transmit Data negative
3
2
Orange/White
Camera TxP - Transmit Data positive
4
3
Blue
Camera RxN - Receive Data negative
1
4
Blue / White
Camera RxP - Receive Data positive
2
5
-
Key for cable ident.
-
6
Red
24V Power
5
7
Black
0V Power (Ground)
6
AMPHENOL
PIN NO.
NOTE: Signal names depend on context, TxN (Transmit Data Negative) for the camera is RxN (Receive Data Negative)
for the PSU or Alarm Unit.
The Redvision Power Supply (part code: RVIP_PSU) outputs 24V DC & is supplied in a weather proof ABS box rated IP67.
Follow the colour coding idents as shown in table below for terminating the fly lead in the power supply.
Amphenol Connector Pinout
(Male mating side pictured)
Terminal Block Pinout
(Male mating side pictured)
4
5
6
1
6
5
4
3
2
1
2
3