3
POWER SUPPLY INSTALLATION & SETUP
Camera Warranty is void unless it is installed using one of the following Redvision power supplies and a Redvision supplied
fly lead (Composite cable): Using the wrong type of 3rd party PSU could compromise safety and damage the camera unit.
•
RVIP-PSU
•
RVIP-PSU-ALM16
•
RVIP-PSU-ALM16-W
The RVX Power Supplies are compatible with the following X-Series Cameras:
RVIP30-1080, RVIP30-1080-W, RVIP30-1080-IR, RVIP30-1080-IR-W, RVIP30-1080-IRWL, RVIP30-1080-IRWL-W.
RVIP30-720, RVIP30-720-W, RVIP30-720-IR, RVIP30-720-IR-W, RVIP30-720-IRWL, RVIP30-720-IRWL-W.
UMBILICAL CABLE:
A pre-made composite cable with a 7 way female amphenol connector is supplied with all Redvision
brackets. The female connector connects directly to the male connector on the RVX PTZ IP Camera housing.
X-IP-SERIES USER MANUAL
3
WARRANTY & SAFETY NOTICE:
DISCONNECT ALL POWER BEFORE
OPENING OR WORKING ON THE POWER SUPPLY UNIT. INSTALLATION
MUST BE CARRIED OUT BY A SUITABLY QUALIFIED PERSON.
The Redvision power supply (part code: RVIP_PSU) outputs 24V DC &is supplied in a
weather proof ABS box rated IP67.
•
Mount the Redvision PSU in a position so it cannot be interfered with intentionally or accidentally.
Ideally use a lockable cabinet.
•
Securely fix the Redvision PSU using appropriate size screws and ensure the cable glands have sufficient
clearance to allow the cables to enter.
•
All cables should be channelled through the appropriate sized gland holes.
•
Only use Redvision supplied umbilical cables for connecting the X-IP-SERIES ball/PTZ dome & Redvision IP PSU.
Warranty will be void if these cables are extended between the PTZ/dome unit and PSU. Extending cables could
also compromise safety.
Follow the colour coding idents as shown in table on page 4 for terminating the fly lead in the power supply.
4 CORNER
FIXING HOLES
MAINS INPUT
EARTH
TERMINAL
CAMERA
CONNECTION
NETWORK
CONNECTION
METAL
PLATE
6 5 4 3 2 1