Redvision RVIP Series, User Manual, Page: 10 / 28

X-IP-SERIES USER MANUAL
6
3.2.1 SUPPLY VOLTAGE
3.2.1.1 INPUT VOLTAGE
Mains input: 110V/230V @ 0.5A
3.2.1.2 OUTPUT VOLTAGE
Output @ Camera connector: 24Vdc @ 3A nominal
3.2.2 RVIP-PSU-ALM INTERNAL CONNECTIONS
3.2.2.1 MAINS POWER INPUT
3.2.2.2 CAMERA CONNECTION
6 Way Terminal Block
PCB IDENT MAINS POWER
* LIVE LIVE (BROWN) 110/230Vac Connection via 2 way terminal block
* NEUTRAL NEUTRAL (BLUE) Connection via 2 way terminal block
* EARTH GREEN/YELLOW Connection via terminal screw
NOTE: Earth connection requires 4mm red spade loop (supplied with PSU) to be fitted by engineer at installation.
S SA AFFE ET TY Y:: E EN NS SU UR RE E M MA AIIN NS S IIN NP PU UT T & & E EA AR RT TH H C CO ON NN NE EC CT TIIO ON NS S A AR RE E S SE EC CU UR RE EL LY Y S ST TR RA AIIN N R RE EL LIIE EV VE ED D..
PIN NO. PCB IDENT WIRE COLOUR SIGNAL
1
TxN Blue PSU TxN / Camera RxN
2
TxP Blue / White PSU TxP / Camera RxP
3
RxN Orange PSU RxN / Camera TxN
4
RxP Orange / White PSU RxP / Camera TxP
5
24V Red
6
GND Black
NOTE: Signal names depend on context, TxN (Transmit Data Negative) for the camera is RxN
(Receive Data Negative) for the PSU or Alarm Unit.
3.2 REDVISION IP POWER SUPPLY WITH ALARM MODULE (RVIP-PSU-ALM)
WARRANTY & SAFETY NOTICE:
DISCONNECT ALL POWER BEFORE
OPENING OR WORKING ON THE
RVIP-PSU-ALM16 POWER SUPPLY
UNIT WITH EMBEDDED ALARM
CARD. THIS PROTECTS HIGH
VOLTAGE COMPONENTS.
INSTALLATION MUST BE CARRIED
OUT BY A SUITABLY QUALIFIED
PERSON.
FIXING
POINTS x4
ALARM/WASH/
AUX RELAY
OUTPUTS
ALARM
CONFIG
SWITCHES
ALARM
INPUTS
CAMERA
CONNECTION
NETWORK
CONNECTION