Redpine Signals RS9116, Reference Manual

Page: 75 / 146

RS9116 n-Link Linux and Android Technical Reference Manual
Version : 2.0
July 2020
75
To connect using EAP-TTLS method, sta_settings.conf should be described as below:
network={
ssid= "Redpine_Signals"
key_mgmt=WPA -EAP
eap=TTLS
anonymous_identity= "ttlsuser"
identity= "test"
password= "password"
}
To connect using EAP-TLS method, sta_settings.conf should be described as below:
network={
ssid= "Redpine_Signals"
key_mgmt=WPA -EAP
eap=TLS
anonymous_identity= "tlsuser"
identity= "test"
password= "password"
ca_cert= "/etc/certs/wifiuser.pem"
client_cert= "/etc/certs/wifiuser.pem"
private_key_passwd= "Wi-Fi"
private_key= "/etc/certs/wifiuser.key"
}
To connect using EAP-FAST method, sta_settings.conf should be described as below:
network={
ssid= "Redpine_Signals"
key_mgmt=WPA -EAP
eap=FAST
anonymous_identity= "fastuser"
identity= "test"
password= "password"
phase1= "fast_provisioning=1"
pac_file= "/etc/p1.pac"
phase2= "auth=mschapv2"
ca_cert= "/etc/certs/wifiuser.pem"
private_key_passwd= "wifi"
}
EAP-LEAP has been used when Freeradius is the RADIUS Server. This has been verified with only Cisco AP.
To connect using EAP-LEAP method, sta_settings.conf should be described as below: