Effective from 29-Jul-21
Page | 10
Cut cover along center and into corners Insert Duralock into vent rails + Omega clips, Trim tail of cover
Auto solar-vent positioning (if an included option)
Stage 5. Fitting the louvre window (rear or sidewall option)
After the tunnel has had its covers fitted - slide the three polycarbonate sheets into place. Remove the backing tape from the 570mm
aluminium strong-back angles and adhere one across the center of each blade to stiffen them.
Fit the strongback alloy angle across center of
each louvre blade to stiffen the polycarbonate
(double sided tape is included)
Louvre mechanism is already fitted
150mm Lockstrip clip
1.5m of Duralock Insert
Omega clip
Omega clip