Firmware Configuration
SUSHI module firemware can be configure with ‘SushiConfig’ tool. that needs
USB connection to WindowsPC or Mac. USB Micro(B) cable is required that
is not included in the package.
‘SushiConfig’ needs Java environment.
Installation of ‘SushiConfig’
Install Java : Install latest Java from url
Install ‘SushiConfig’ : Download latest config tool, ‘SushiConfigxxx.zip’
from url
http://www.g200kg.com/products/sushi/
version numbers), and upzip to appropriate folder.
‘SushiConfig’ usage
1)
Mac may cause security error when the first launch. In the [Apple] –
[System environment] – [Security&Privacy] – [General] setting, click the
lock icon and temporaly set ‘Allow applications download from’ to
‘Anywhere’.
2)
Set the jumper of SUSHI to [PROG] position.
3)
Connect PC/Mac to SUSHI with MicroUSB cable.
4)
Power up the SUSHI module.
5)
Press the [RESET] button on rear side of SUSHI module.
6)
doble click the ‘SushiConfig.jar’ in the unziped folder.
7)
Select [Port] :
Mac : Select ‘/dev/cu/usbserial’.
Windows : Select ‘COMx’, here the x is a number (probably 3 - 5)
that represent ‘Prolific USB-Serial Comm Port’. It can be confirmed in
device manager [port] menu.
8)
Select the firmware with [Prog] setting.
9)
Press the [Write] button to write to module. After that, set jumper to
[NORM] position and press [RESET] button of SUSHI module.
10)
Also, if you press the [Boot] button instead of the [Write] button, the
firmware will not be written, but will start up with the firmware selected
this time only.
