RDL-2000
User Manual
70-00143-01-01a
Proprietary Redline Communications © 2010
Page 46 of 50 September 24, 2010
Table 9: CLI - Command Summary
Current power = 15 dBm
pwd <new_pswd> <new_pswd>
Change the password of the current user (must be logged-in)
new_pwd
- Enter the new password twice (second entry is for confirmation).
Password changes are saved immediately and do not require the
update
command.
Example: Change password to Az123:
[192.168.25.2] >>:
pwd Az123 Az123
quit
Exit from this Telnet session.
Important
: If required, save parameters before exiting (see
update
command). All
unsaved changes are discarded.
Example: Exit from this session:
[192.168.25.2] >>: quit
Connection to host has been lost.
rate <dl_rate> <ul_rate>
View or modify the RDL-2000 downlink and uplink rates.
Rate settings are: 0 = BPSK 1/2, 1 = QPSK 1/2, 2 = QPSK 3/4, 3 = 16 QAM 1/2, 4 = 16
QAM 3/4, 5 = 64 QAM 2/3, 6 = 64 QAM 3/4, and 7 = 64 QAM 5/6
dl_rate:
Enter the desired maximum downlink modulation/coding for the link. When
Adaptive Modulation is disabled, the RDL-2000 downlink rate is fixed at this
modulation/coding. When Adaptive Modulation is enabled, this setting is ignored.
ul_rate:
Select the desired maximum uplink modulation/coding for the link. When
Adaptive Modulation is disabled, the RDL-2000 uplink rate is fixed at this
modulation/coding. When Adaptive Modulation is enabled, this setting is ignored.
Example: Set the RDL-2000 rate to downlink = 64 QAM 5/6 and uplink = 64 QAM 2/3:
[192.168.25.2] >>:
rate 7 5
reset
Reboot the RDL-2000. The current Telnet session will be closed. Unsaved changes will
be discarded.
Example: Reset the RDL-2000:
[192.168.25.2] >>: reset
Connection to host has been lost.
rtext [clear]
View or clear the recorded cause of the last system reset.
[blank]
- Display cause of last reset.
clear
- Delete the cause of the last reset.
Example: Clear the
cause of the last reset
:
[192.168.25.2] >>:
rtext clear
rssi [clear]
View or enable/disable the RSSI collection settings.
[blank]
- Display current mode/setting.
