Redline RDL-2000 User Manual Download Page 44

Page: 44 / 50

RDL-2000

User Manual

70-00143-01-01a

Page 44 of 50 September 24, 2010

Table 9: CLI - Command Summary

- Enable AES.

SharedKey

- View or enter the cryptographic key to be shared between the Master and

Slave when AES encryption is enabled. The key must be a maximum of 16
bytes, and include only alphanumeric characters (a-z, 0-9). This field is used
only when AES is enabled. Identical encryption settings must be used on the
Master and Slave.

Example: Use the following command to enable AES on the Master.

[192.168.25.2] >>:aes on SharedKey123

aes on SharedKey123

Important

: The Master and Slave RDL-2000 units must have identical encryption

settings or the system will not establish a wireless link.

atpc <off> <on> <power>

View or change the automatic transmit power control (ATPC) mode settings.

[blank]

- Display current mode/setting.

Master: Display current ATPC RSSI level.

Slave: Display current Tx power level.

off

- Disable ATPC.

- Enable ATPC.

power

- Enter the target Rx power threshold (dBm).

Example: Use the following command to enable ATPC on the Master and set the RSSI
threshold of the link to -60 dBm.

[192.168.25.2] >>:atpc on -60

autorate <off> <on>

View or change the adaptive modulation settings. When adaptive modulation is

disabled, the RDL-2000 will transmit using only using the selected modulation/coding
(see

rate

command). When adaptive modulation is enabled, the modulation/coding is

adjusted automatically based on current link conditions.

[blank]

- Display current mode/setting.

off

- Disable adaptive modulation.

- Enable adaptive modulation.

Example: Enable adaptive modulation on the master:

[192.168.25.2] >>:autorate on

MU autorate

autorate on

extsync

This function not supported in this release.

firmware <[blank] | file.brn>

View the firmware versions or upload a new binary file. The RDL-2000 contains non-

volatile storage for two versions of the software. The upload function overwrites the
non-operational version.

[blank]

- Display current software versions. The text 'FFFF FFFF' indicates that no

software is loaded in the alternate bank.

binary

- Full name of binary file (including the .bin extension).to upload to the RDL-

2000. A TFTP server must be installed and running on the computer running

Summary of Contents for RDL-2000



















































Search results

Summary of Contents for RDL-2000

Reviews:

Related manuals for RDL-2000

Brands by name

Popular brands

Redline RDL-2000, User Manual

Search results

Summary of Contents for RDL-2000

Reviews:

Related manuals for RDL-2000

Brands by name

Popular brands