Seat unit options
Straighten the bar under the seat unit and
secure in place with the Velcro tabs (Fig.11)
Seat unit mode: To use from 6mths plus (as
a seat), connect the 3 clips shown together
(Fig.12)
Carry cot mode: Undo all 3 clips to use it for
newborn. This provides a flat cradle space for
use as a carry cot
To attach the bumper bar
Slot the ends of the bumper bar in to the holes
in the centre of the seat/cot unit and push down
until they click in place. To remove the bar, push
in the buttons on each side and pull out. You
can release one side of the bumper bar and
swivel it around to aid you in putting your child in
or taking them out of the seat unit.
(Fig.13)
To attach and operate the canopy
Push the brackets on the end of the hood on to
the seat/cot frame where the pin is and attach
the back of the hood by connecting the zip to
the back of the seat/cot unit. Simply push or pull
the front bar of the hood to open or close it.
(Fig.14).
Fig 11
Bars
Velcro tab
Velcro tab
Fig 12
Seat unit - underneath
Clip 1
Clip 2
Clip 3
Fig 13
Bumper bar
Hood
Fig 14
Seat unit -
underneath
