To attach the seat unit to the frame
Slot the adaptors on the seat unit to the
brackets on the frame (Fig.15) .
To rotate or remove seat unit
To reverse the seat unit or take it off, squeeze
the triggers on both sides and lift off (Fig.16) .
To attach the apron
Zip the apron onto the seat unit and wrap the
end of it around the bumper bar and secure
with the Velcro (Fig.17) .
To adjust the calf support
Push the buttons on both sides of the seat unit
and choose which position you would like the
calf support (Fig.17).
To recline the seat unit
Lift the lever on the back of the seat unit to
select a different position. Then raise or lower
the seat to the desired height and release the
lever. (Fig.18).
Car seat
The hood attaches to the car seat with 3 press
studs.
Attach the car seat to the stroller in the same
way as the seat unit by slotting the adaptors on
the seat unit to the brackets on the frame.
To raise or lower the handle press in the buttons
and adjust the handle (Fig.19).
To fold the stroller
Remove the car seat or seat unit from the
frame.
Lower the handle by sliding the primary lock
button to the side and then squeeze the
secondary lock trigger. (Fig.20) .
Just above the basket between the legs there
is a strap(Fig.21) pull the strap upwards and
this will lock the frame in a closed position.
Fig 16
Fig 15
Fig 18
Fig 19
Adaptor
Bracket
Seat unit
Frame
Trigger
Calf
support
adjustment
button
Fig 17
Seat unit
adjustment
button
Fig 20
Adaptor
Bracket
Car seat
Frame
Fig 21
Car seat
release button
Strap
Handle
Handle adjustment
button
Apron
