Redi Controls Redi-Purge PRG-113-C3, Installation, Operation & Maintenance Manual, Page: 36 / 68

36
Displayed:
Diagnostics Mode
OUTPUTS = B
NOTE: Purge will remain in the Diagnostic mode until the STOP keypad switch is pressed.
NOTE: Note: The “SENSORS” keypad switch can be used while in the diagnostic mode.
“LOGs” Keypad Switch
Log 1 -
30 day "sliding window" average purge pumpout time (chiller OFF)
Displayed:
Pump 30 day Avg.
Chllr OFF: 00:00
(hours:minutes)
To view actual pump-out time day-by-day for last 30 days (or for the
number of days recorded in the Log up to 30 days), use the “<“ or “>“ key
pad switch to scroll forward and backward one day at a time.
Displayed:
Chlr off Pumpout
Day 00 H:M 00:00
(hours:minutes)
To return to start of “
Log 1 ” press “ LOGs ” Keypad switch again.
To advance to next
Log press “ SCROLL ”
To exit “
LOGs ” display press “ STATUS ”
Log 2 -
30 day "sliding window" average purge pumpout time (chiller on)
Displayed:
Pump 30 day Avg.
Chllr ON: 00:00
(hours:minutes)
To view actual pump-out time day-by-day for last 30 days (or for the
number of days recorded in the Log up to 30 days), use the “<“ or “>“ key
pad switch to scroll forward and backward one day at a time.
Displayed:
Chlr on Pumpout
Day-00 H:M 00:00
(hours:minutes)
To return to start of “
Log 2 ” press “ LOGs ” Keypad switch again.