25
14.2 REPLACING THE FILLING COULTERS
Fig.14
Follow the procedure below when fitting new or different filling coulters
(See Fig. 14)
:
1.
!! Ensure that the Vibra-Sandmaster is stable on the floor and that it cannot
subside or slide !!
2. Rotate the slider feet downward by unscrewing spindles 1 and 2 on either side of the
machine.
3. Remove pin 5 on both ends of the machine and let the slider feet rotate downwards.
4. Remove the bolts 3 and nuts 4.
5. Remove the filling coulters to be replaced.
!! Take care! The blades are sharp !!
6. Fit the new filling coulters
7. Fit the bolts 3 and nuts 4 and firmly tighten them.
8. Connect the slider feet with pin 5 on both sides of the machine.
At the same time, check the drive mechanism of the filling coulters and
lubricate the bearings (for lubricating points see section 14.0)
Summary of Contents for Vibra-Sandmaster 1600
Page 10: ...10 Fig 7...
