4
The Vibra-Sandmaster
may
NEVER
be used if the safety guards and safety stickers are not
present.
NEVER
crawl underneath the Vibra-Sandmaster.
Tilt Vibra-Sandmaster if required.
NEVER
get off the tractor while the engine is still running.
The Vibra-Sandmaster must be blocked to prevent it from lowering / driving off / sliding away
when performing maintenance, adjustment and repair activities.
Always switch off the tractor engine, remove the tractor ignition key and
disconnect PTO
when performing maintenance, adjustment and repair activities
(Fig.
2).
Fig. 2
Only use original Vibra-Sandmaster
parts for maintenance or repair activities in order to
guarantee the safety of the machine and user.
Adjustments and repairs to the Vibra-Sandmaster
must be performed by authorised,
technical staff only.
Maintain a repairs record.
(5) In addition to the instructions in this user manual, the prevailing safety standards and
Occupational Health and Safety regulations must be observed.
The governing procedures of the traffic regulations apply to use on public highways.
Transport of persons is not permitted!
Do not use the Vibra-Sandmaster during hours of darkness, heavy rain/storm or on slopes with a
gradient greater than 20 degrees.
All persons using the Vibra-Sandmaster
must be familiar with all functions and operational
elements of the machine prior to commencing the activities.
Connect the Vibra-Sandmaster
to the pulling vehicle as stated in the instructions.
(Injury hazard!)
Ensure that you have a clear long distance view and clear sight of the immediate vicinity.
There are safety stickers
(Fig.5)
on both sides of the Vibra-Sandmaster, one on the side panel
(Fig.
with an identical meaning. These safety stickers must be clearly visible and legible at all times
and replaced when damaged.
Persons must
STAY out of the hazard zone
of the Vibra-Sandmaster
when operational, as there
is a physical injury hazard due to rotating parts.
(Fig. 3)
Summary of Contents for Vibra-Sandmaster 1600
Page 10: ...10 Fig 7...
