16
12.0 MAINTENANCE
Time schedule
Check/Grease point
Method
Before
every
use
-
Check for loose bolts / nuts.
-
Presence and readability of
the safety stickers
(Figure 6)
-
Tighten loose bolts / nuts
with the correct tightening
moment.
-
Replace these if not present
or damaged.
After the
first
20 working
hours
(new or repaired)
-
Check the roller bearings
and the driveline.
-
Check for loose bolts / nuts.
-
Check the play of the
chains.
-
If required, replace the
parts.
-
Tighten loose bolts / nuts
with the correct tightening
moment.
-
If necessary, adjust the play
of the chains. (see Section
12.1)
After
every
100 working
hours or annually
-
Check the roller bearings
and the driveline.
-
Check for loose bolts / nuts.
-
Check the play of the chain
in the driveline.
-
Check the wear of the V-
belts.
-
Check the wear of the
brush.
-
Grease the drive chain.
-
If required, replace the worn
parts.
-
Tighten loose bolts / nuts
with the correct tightening
moment.
-
If necessary, adjust the
tension of the chain or – if
required – replace the
chain.
-
If necessary, replace the V-
belts.
-
If necessary, replace the
brush.
-
Use an universal chain
grease.
Please refer to the supplied manual of the motor for maintenance of the
motor!!
