14 | Charge the GoBlock
Charge From a Vehicle Accessory Socket
Plug the supplied 7.5 A Accessory Socket Trickle-Charger into a vehicle accessory socket in your
vehicle, then plug the charger into the Trickle-Charge Input on the GoBlock.
The GoBlock will charge at a maximum rate of 7.5 A, however this may be less depending on the
voltage of the vehicle.
IMPORTANT:
When charging via the 7.5 A Accessory Socket Trickle-Charger, the
GoBlock may
completely discharge your vehicle battery
in the following cases:
If the vehicle accessory socket is connected directly to the vehicle start battery; i.e. the socket is
powered even when the vehicle ignition is off)
When the ignition is in the 'ACC' position; e.g. listening to music while the engine is not running.
Ideally, only charge via the vehicle accessory socket when the engine is running.
CAUTION
When charging the GoBlock from a vehicle accessory socket, ensure that the Trickle-Charger
accessory connector is fully inserted into the accessory socket in the vehicle. Poor contact
can cause the plug to overheat.
The Accessory Socket and Trickle-Charger connector may become hot during
normal use — take care when handling.
Charging from a vehicle accessory socket using the Trickle-Charger.
Summary of Contents for GoBlock PPS12050
Page 1: ...MODELS PPS12050 PPS12100 ...
Page 43: ......
