RED ACG6099, Manual

Page: 19 / 36

19
G
B
- FREQUENCE 868,3 MHz
- SENSITIVITY -108 dBm
- OUTPUT POWER <25 mW
- BATTERY FEED 3 x AA1,5 V (> 2,7 Ah)
- IDLE ABSORPTION 25 uA
- MAX ABSORPTION 13 mA
- MODULATION TYPE FSK
- RANGE 20 m in free space without aerial
- BATTERY(IES) LIFE 3 years (Alkaline)
4 years (Lithium)
- CASE External - Technopolimer
- SIZE 129x89x58 mm
- PROTECTION LEVEL IP56
- OPERATION TEMPERATURE From -20°C to +60°C
TECHNICAL FEATURES
ACCESSORIES
AA ALKALINE BATTERIES AA LITHIO BATTERIES
4 X 1,5V - battery life with RED - 3 years.
code ACG9519
2 X 1,5V - battery life with RED - 4 years (buy 2 pieces).
For extreme temperatures -40 ÷ +60°C.
code ACG9509
TROUBLESHOOTING
PROBLEM CHECK
During recording of the RED, the buzzer sounds for 3/5 second It has been tried to record a RED with wrong DIP.
Verify that the EDGE PHOT LED that blinks on MASTER Wi-Fi corresponds to the dip on
RED to memorize
During recording of the RED, the buzzer emits 2 tones RED code is already in the memory
The buzzer emits a tone every 3 seconds and one of the EDGE PHOT LEDs is turned
on red Replace as soon as possible the batteries of the RED as they are low
The gate doesn’t move. The buzzer emits an alternating sound and one of the EDGE
PHOT LEDs blinks green/red. Replace the batteries of the RED as they are empty
The buzzer does not sound when the batteries are removed from the strip On the MASTER Wi-Fi, verify that the EDGE PHOT DIP corresponding to the RED is in ON
position