17
PA
G
E
Specification
SoundBITE LITE SPECIFICATION
Sample rate:
Conversion resolution:
Polyphony:
Sample loop length:
BPM range:
Connections:
Power Supply:
Dimensions:
Weight:
Accessories (included):
96kHz
24 bit
6 sample loops
1, 2, 4(x2), 8, 16 (32 beats total)
60 - 230BPM (3 ranges)
Audio input, Loops output, Monitor output, AC adapter input
9vDC 500mA minimum - Output plug = 2.1mm wired centre pin +
202(H)x106(W)x30(D)mm
8”(H)x 4 1/4”(W)x 1 1/4”(D) inches
1Kg (2lb 4oz)
Connecting Cables ( input - 1 x 1/4” Jack to RCA ) (output - 1 x single RCA to twin RCA )
Mounting kit
*If your mixer has a send/return feature, grab/play a sample and send it to an external effects device for extra
creativity. This can be easily achieved using the RED Sound INFADER and XS-FX.
*Because audio input/loop sync can drift as time progresses due to factors such as fluctuating deck drive speed,
slipmat and the quality of the acetate/vinyl record (the master track) itself, you may wish to PFL the individual
sample (or all recorded [LOOP] pads) and realign using the [EDIT] jog dial. SoundBITE will have time stretched the
samples for you to play at the same speed as the master output but you will need to beat mix the kick/snare/hi hats
as you would on a real turntable.
*On shorter loop lengths, you can shift the sample to play on the off beat relative to where it is on the original track
by rotating the [EDIT] jog dial in either direction 16 steps ( i.e. from beat 1/measure 1 to beat 1/measure 16)
* Specification and /or appearance subject to change without prior notice due to product improvement.
OWNERS MANUAL
