14
PA
G
E
OTHER LOOP EDIT FEATURES
LOOP OUTPUT LEVEL
LOOP SYNCHRONISATION ADJUSTMENTS - INDIVIDUAL LOOPS
These additional features allow you to control the output level of the loop samples and vary the synchronisation of
the loops in relation to the incoming audio.
When a loop has been recorded you can adjust its output level if desired - e.g. the Automatic Gain Control may
boost quieter passages and so this feature lets you trim the level to suit. To boost/cut the output level of a loop, first
press and hold down the [LOOP] button when it is in
mode (indicator ON), as shown in the following
example:
RANGE = -20dB to +6dB (due to display limitations the two lowest settings are indicated as -EdB (-16) and -FdB
(-20)
To increase/decrease the volume simply rotate the [SHIFT LOOPS/EDIT] jog dial
the
[LOOP] button. To exit this mode simply release the [LOOP] button.
You can use this feature to manually adjust the synchronisation of each loop independently. This may be necessary
if the BPM engine loses input beat information during a track and the loop starts to drift-out of synchronisation or
you may wish to creatively move the relative position of individual loops (try moving a loop half a beat compared to
the input audio/other loops to achieve a new syncopated rhythm).
To adjust the synchronisation point of an individual loop, first press and hold down the [LOOP] button when it is in
mode (indicator OFF), as shown in the following example:
PLAY
MUTE
whilst still holding down
BEATS
BEATS
8
16
Press & hold in MUTE mode
(indicator OFF) to enter
‘SYNC ADJUST’ mode
Operation
SoundBITE - DJ Loop Sampler
Default level setting = 0dB
[+/up]
[-/down]
FWD
REV
EDIT
Rotate to increase/
decrease loop volume
BEATS
BEATS
8
16
Press & hold in PLAY mode
(indicator ON) to enter
‘LEVEL TRIM’ mode
Example: new level = +4 dB
BPM
BPM
incremented to...
