SET UP MASTER/SLAVE OPERATION
NOTE:
Master/Slave operation requires a GIG-E port, which is available on the DSMC2 REDVOLT Expander and
DSMC2 Jetpack-SDI Expander. For more information, go to
"GIG-E (Ethernet)" on page 210
1. Connect the cameras using the Master/Slave Gig-E Cable:
A. Connect the
GIG-E
port on one expander to the
GIG-E
port on the other expander.
2. On the Master camera, follow the instructions below:
A. Go to
Menu
>
Settings
>
Setup
>
Communication
.
B. Type a name for the camera (Example: CAM A, LEFT, MASTER, etc) in the
Camera ID
field.
C. Set
Target
to
All
.
Figure: Master Settings
D. Go to
Menu
>
Settings
>
Setup
>
Communication
and select the
Ethernet
tab.
E. Select the
Camera to Camera
the check box.
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC
9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M
|
1 6 0
RED RAVEN OPERATION GUIDE
