Red Pitaya HAMlab, User Manual, Page: 55 / 116

HAMlab, Release 1.0
SHOW : Shows or hides the curve associated with the channel.
INVERT* : Reflects the graph on the X axis.
Probe attenuation : The division that was set on the probe. (must be selected manually)
Vertical offset : Moves the curve up or down.
LV and HV : Are osciloscope input range options of your HAMlab implemented via attenuator.
•
HV
represent
higher voltage range
from
-20
to
+20
V.
•
LV
represent
low voltage range
from
-1
to
1
V.
AC and DC coupling: HAMlab enables you to mesure signals in two coupling modes AC and DC .
• AC Osciloscope will show only AC component of a signal.
• DC Osciloscope will show both AC and DC components of a signal.
3.1. Oscilloscope with Signal Generator 51