Red Pitaya HAMlab, User Manual, Page: 26 / 116

HAMlab, Release 1.0
Note:
xxxxxx
are the last 6 characters from MAC address of your HAMlab. MAC address is written on the back
hamlab panel.
Fig. 2.1: Figure 1: Connecting your HAMlab to the LAN network.
After the third step you will get a HAMlab main page as shown below.
Direct Ethernet cable connection
It is possibe to establish direct connection between your pc and HAMlab. For Windows 10 just connect HAMlab to
your computer and access it using
rp-xxxxxx.local/ method.
Note: Windows 7/8 users should install Bonjour Print Services , otherwise access to
*.local
addresses will not
work.
If there are some restrictions for the user to have HAMlab on the DHCP LAN network permanently there is a
possibility to directly connect to your HAMlab. This type of connection requires additional settings on your PC and
HAMlab.
Note: This connection is also arranged via Network manager application so users should first have access to the LAN
(DHCP) network in order to arrange static IP on the HAMlab.
22 Chapter 2. Quick start