red lion ET-8EG-MIL-1, User Manual

Page: 12 / 14

ET-8xG-MIL_manual.r08 Page 12 of 14 Last Revised: 24-Apr-15
Red Lion Controls

20 Willow Springs Circle

York, PA 17406

USA

1-717-767-6511

support@redlion.net
Section 4 LEDs
Pressure
Vent
The switch has a set of LEDs to indicate the status of various operating conditions as
defined below.
Typical LED Location
Status LED
(managed model only)
The Status LED indicates the overall health of the switch. It is normally ON solid indicating
that no internal CPU or software problems are detected. It will flash when loading firmware
and briefly on power up or reset. Otherwise, if it is OFF or flashing for an extended period of
time then a problem is detected. In this case, please contact technical support.
Power LEDs
There is a power LED labeled as Power. It will be on solid when power is applied to the
switch.
Ethernet
LEDs
The switch has a set of LEDs to indicate the status of various operating conditions as
defined below.
Solid Green = 1000 Mbps linked detected but no Ethernet activity.
Flashing Green = 1000 Mbps linked detected with Ethernet activity.
Solid Orange = 10/100 Mbps linked but no Ethernet activity.
Flashing Orange = 10/100 Mbps linked detected with Ethernet activity.
OFF = No link detected.