41
20-CLEANING AND MAINTENANCE
Technical Dept. - All rights reserved - Reproduction prohibited
When emptying the trolley, thoroughly clean the top and bottom auger compartment with the vacuum cleaner nozzle.
AUTOMATIC CLEANING
The boiler is equipped with a series of devices that facilitate the automatic cleaning operations of the product.
Please note that these devices are not substitutes to the normal routine cleaning operations (brazier cleaning, trolley emptying and
cleaning of lower augers with vacuum cleaner).
During automatic cleaning, the boiler activates:
• The pipe-scraper linkage, thus cleaning the heat exchanger, keeping it always efficient (120” every 60’)
• Pulling augers to remove the ash from inside the Ash trolley (120” every 60’)
• Automatic cleaning device of the brazier.
Automatic cleaning is carried out with the boiler ON.
Whereas, if the boiler works for long periods without being switched off (300’), the complete cleaning cycle will occur automatically
forcing the boiler off to allow for these operations. Once automatic cleaning is performed, the boiler automatically switches on again.
