Red Hat ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES Installation Manual Download Page 54

Page: 54 / 108

17. Installing Packages

At this point there is nothing left for you to do until all the packages have been installed. How

quickly this happens depends on the number of packages you have selected and your

computer's speed.

18. Installation Complete

Congratulations! Your Red Hat Enterprise Linux installation is now complete!

The installation program prompts you to prepare your system for reboot.

Do whatever is appropriate to boot Red Hat Enterprise Linux. One or more screens of

messages should scroll by. Eventually, a

prompt or a GUI login screen (if you installed

the X Window System and chose to start X automatically) appears.

arch="s390" Once the installation is complete, you must IPL (boot) from the DASD(s) where

Red Hat Enterprise Linux has been installed. For example, on the 3270 console you may issue

the command

#cp i 200

Note

Assuming you are to disconnect from the 3270 console, use

#cp disc

instead of

#cp logout

#cp log

. This allows Red Hat Enterprise Linux for S/390 to

continue running when not connected to the 3270 console.

Following IPLing the installed Red Hat Enterprise Linux OS, you may log on to the system via

telnet

ssh

. It is important to note that the only place you can log in as root is from the 3270

or from other devices as listed in

/etc/securetty

. To log in as root from remote systems, use

ssh

The first time you start your Red Hat Enterprise Linux system in run level 5 (the graphical run

level), the Setup Agent is presented, which guides you through the Red Hat Enterprise Linux

configuration. Using this tool, you can set your system time and date, install software, register

your machine with Red Hat Network, and more. The Setup Agent lets you configure your

environment at the beginning, so that you can get started using your Red Hat Enterprise Linux

system quickly.

For more information on using the Setup Agent, refer to the chapter titled Getting Started in the

Red Hat Enterprise Linux Step By Step Guide.

For information on registering your Red Hat Enterprise Linux subscription, refer to

https://www.redhat.com/apps/activate/

Chapter 2. Installing Red Hat Enterprise Linux

Summary of Contents for ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES













































































































Search results

Summary of Contents for ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Reviews:

Related manuals for ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Brands by name

Popular brands

Red Hat ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES, Installation Manual

Search results

Summary of Contents for ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Reviews:

Related manuals for ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Brands by name

Popular brands