Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION, Administration Manual

Page: 469 / 554

Frequency Settings for Automated Jobs
447
Parameter Description
summary.enabled
Specifies whether a summary of the certificates
removed by the job should be compiled and sent.
The value
true
enables the summaries;
false
disables them. If enabled, set the remaining
summary parameters; these are required by the
server to send the summary report.
summary.emailSubject
Gives the subject line of the summary message.
summary.emailTemplate
Specifies the path, including the filename, to the
directory containing the template to use to create
the summary report.
summary.itemTemplate
Specifies the path, including the filename, to the
directory containing the template to use to create
the content and format of each item collected for
the summary report.
summary.senderEmail
Specifies the sender of the summary message,
who will be notified of any delivery problems.
summary.recipientEmail
Specifies the recipients of the summary
message. These can be agents who need to
know the status of user certificates or other
users. More than one recipient can be set by
separating each email address with a comma.
Table 19.3. unpublishExpiredCerts Parameters
19.3.6. Frequency Settings for Automated Jobs
The Job Scheduler uses a variation of the Unix
crontab
entry format to specify dates and times for
checking the job queue and executing jobs. As shown in
Table 19.4, “Time Values for Scheduling
Jobs”
and
Figure 19.3, “Job Configuration”
, the time entry format consists of five fields. (The sixth field
specified for the Unix
crontab
is not used by the Job Scheduler.) Values are separated by spaces or
tabs.
Each field can contain either a single integer or a pair of integers separated by a hyphen (
-
) to indicate
an inclusive range. To specify all legal values, a field can contain an asterisk rather than an integer.
Day fields can contain a comma-separated list of values. The syntax of this expression is
(Minute) (Hour) (Day of month) (Month of year) (Day of week)
Field Value
Minute 0-59
Hour 0-23
Day of month 1-31
Month of year 1-12
Day of week 0-6 (where 0=Sunday)
Table 19.4. Time Values for Scheduling Jobs
For example, the following time entry specifies every hour at 15 minutes (1:15, 2:15, 3:15, and so on):