COPYRIGHT © 2015 RED.COM, INC
REDCAST MODulE OPERATION GuIDE
955-0072, REV-H | 24
OUTPUT 3D LUTS VIA THE REDCAST MODULE
You can select a different 3D LUT for each SDI-OUT connector.
1. Go to
Menu
>
Settings
>
Display
>
REDCAST
.
2. Select a 3D LUT from each
LUT
drop-down menu. Each drop-down menu corresponds to a REDCAST Module
connector and output quadrant (if in UHD mode), as described in the table below:
LUT DROP-DOWN MENU
CONNECTOR
QUADRANT (IN UHD MODE)
LUT 1
SDI-OUT 1
Top left
LUT 2
SDI-OUT 2
Top right
LUT 3
SDI-OUT 3
Bottom left
LUT 4
SDI-OUT 4
Bottom right
Each SDI-OUT connector outputs the selected 3D LUT.
