COPYRIGHT © 2015 RED.COM, INC
RED 4K BROADCAST MODULE OPERATION GUIDE
955-0072, REV-E | 26
BROADCAST SETUP WITH SMPTE FIBER BRIDGE
This section describes example setups and workflows for using the 4K Broadcast Module in configurations that
incorporate a SMPTE fiber bridge and a fiber adaptor. Example configurations include:
Handheld/EFP (electronic field production) broadcast setup
Fixed/studio broadcast setup
HANDHELD/EFP SETUP: RECOMMENDED EQUIPMENT
4K Broadcast Module (required)
+1 Adaptor Module or Module Adaptor (required)
Four (4) 3G/HD-SDI cables (required)
RED WIRELESS MoToR DRIVER (W.M.D.)
Iris motor
Cinema zoom lens with servo drive unit and power cable
Iris rods and rod mount
RED Touch 7.0" LCD
RED BoMB EVF
Tally light
Shoulder pad
Fiber adaptor (required)
Fiber adaptor base station (required)
311M SMPTE hybrid fiber cable (required)
Ethernet cable (required for camera control)
Remote camera panel (RCP) system (required for camera control)
FIXED/STUDIO SETUP: RECOMMENDED EQUIPMENT
4K Broadcast Module (required)
+1 Adaptor Module or Module Adaptor (required)
Four (4) 3G/HD-SDI cables (required)
RED WIRELESS MoToR DRIVER (W.M.D.)
Lens motors
Zoom and focus demands
Display viewfinder
Headset intercom
Sled
Tripod
Fiber adaptor (required)
Fiber adaptor base station (required)
311M SMPTE hybrid fiber cable (required)
Ethernet cable (required for camera control)
Remote camera panel (RCP) system (required for camera control)
