9
www.RedDevilEquipment.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
1785871 Rev J
ECO 15-0051 B
December 2015
Owner’s Manual: XVL10
1. Open the cabinet Door
2. Load the can into the machine for mixing:
•
Gallon Cans:
Insert the can into the can
holder. Slip the bail handle into the clip
retainers
(D)
.
•
Quart Cans:
Place the can inside the quart
adapter, 9783761
(A)
. Set the quart can
horizontally with the lid up. (See Figure 1)
• Pint Cans:
Place round pint cans vertical,
with the lid up. Close the 9783761 adapter
around the can. (See Figure 2)
• Half Pint Cans:
Place the half pint can inside
the 6786133
(E)
foam adapter. Close the
9783761 adapter arount the 6786133 foam
adapter. (See figure 3)
3.
For
Quarts, Pints & Half pints
: Insert the
adapter into the can holder .Make sure the
9783761 adapter lugs
(C)
are lined up with the
bail retainers and the adapter is all the way to
the bottom of the can holder
(B)
. (See Figure 4)
4.
Close the cabinet door. The mixer has a
safety switch that interrupts operation if the
door is open.
5.
Select the desired mix time.
If the container handle wasn’t properly
secured, press the STOP button on the control
panel.
NOTE: If colorant has been added to the paint,
be sure to reattach paint can lid tightly (using
the RED DEVIL EQUIPMENT Lid Press, Part No.
0-5080).
Select mix time by pressing a preset mix cycle
push button (XVL10 models).
Always unplug the power cord before
cleaning!
DO NOT
get the timer, control panel,
or wiring wet.
CLEANING:
Keeping the machine clean is important for
reliable operation.
•
Colorant or base paint spilled on machine
surfaces can be removed using lukewarm
water and mild detergent for water-based/
glycol colorants.
•
To preserve the appearance of the machine,
do not use abrasives to clean machine
surfaces.
(B)
5. C
leanIng
(A)
(D)
(C)
Figure 1
Figure 3
Figure 2
Figure 4
(E)
