background image

Accessories

RECSEA Standard Grip, M67 Adapter, Diffuser, Strobe Mask-

External Strobe Connection Mount (Fiber-Optic/SEA&SEA) and 

Screw, Lens Cap/Close-up Lens Adapter, Lens Cap, Camera 

Extraction Tabs x 2, Wrist Strap, Reserve O-rings (1 Back Cover, 1 

Port), O-ring Removal Pick, O-ring Grease

INSURANCE INFORMATION

 

We strongly recommend insuring your camera. For more information please contact your 

dealer.

CONSUMABLE PARTS

For  replacement  of  consumable   parts  such   as  O-Rings  please  contact  your  dealer   or 

Seatool/Recsea.

OPTIONS

The following items are optional. Please contact Recsea or your local dealer if you wish to 

purchase.

RMMF-02 Rougan Viewfinder

ST Mount Adapter AD-CUST-G10

M67 Mount Adapter AD-CUM67-G10

INON UWL-H100 28LD Port Adapter ADP-28LD-G1XMkII

Close-Up Lens 50mm x2 SAL-02-G10

Close-Up Lens 50mm x3 SAL-03-G10

Close-Up Lens 50mm x2 SAL-02-ST

Close-Up Lens 50mm x3 SAL-03-ST

WHC-G1XMkII Housing O-ring Set

Seatool O-ring Grease 3 ml Tube

Ball Joint Base SBB-M10

Left-hand Single Grip & Tray Assembly STG-06L2 (POM)

Dual Grip & Tray Assembly STG-06W2 (POM)

Left Hand Single Grip & Tray Assembly STG-05L2 (AL)

Dual Grip & Tray Assembly STG-05W2 (AL)

Left Hand Single Grip & Tray Assembly STG-05JL2 (AL)

Dual Grip Extension STG-05JWEP (AL)

INON Tray Adapter ADT-1S

AFTER-SALE SERVICE

Warranty   period   is   two   (2)   years   from   purchase   for   general   users,   six   (6)   months   for 

commercial   or   industrial   users.   Seatool/Recsea   will   repair   manufacturing   defects   free   of 

charge during the warranty period when product is used in accordance with this manual. This 

warranty is only valid for housings purchased from authorized Seatool/Recsea international 

dealers. Damage due to customer use, and for any consumable parts, the repairs will be 

charged at normal rates. Shipping costs to and from dealer, or Japan if necessary, shall be 

born by the customer for warranty and all other cases. This warranty does not cover any 

damage   to   digital   camera   for   any   reason,   including   damage   caused   by   water   intrusion. 

Please   obtain   insurance   for  all   your   equipment.  Any  repairs   due   to  the   following   will   be 

charged at normal rates:

1) Repaired, modified or dissembled by person or company other than Seatoll/Recsea;

2) If damaged in fire, natural disaster such as earthquake, flood, lightning, etc.;

3) Damage caused by dropping, impact, vibration;

10.

Summary of Contents for WHC-G1XMKII

















Reviews: