ATTENTION!
※
When Housing is not used for long periods, remove O-rings, place them in a plastic bag to
keep them free of dust and other contaminants and store in a place out of direct sunlight.
Please also be careful of prolonged exposure to direct sunlight during use. The O-Rings
and housing may become deformed, causing water leakage.
※
After extended periods of non-use, soak empty Housing, with Lens Port attached, in
lukewarm for half a day. Manipulate all buttons and dials several times. Using a soft, dry
cloth wipe away water.
CAUTION!
※
The O-rings are an essential part of waterproofing for this housing. Not properly greasing
the O-rings as direct may cause the O-rings to twist in the O-Ring grooves, possibly
causing water leakage.
※
Always perform the above O-ring, O-ring groove and O-ring surface maintenance and
greasing every time you open/close the housing.
※
Please pay close attention and make sure the O-rings are not twisted or bulging, free of
any contaminants (dirt, hair, etc.), and that foreign objects do not obstruct proper closing
of the Housing back cover or attachment of the Lens Port.
※
DO NOT clean the Housing with volatile organic solvents or chemical cleaning agents
such as thinner, gasoline, and benzine, etc.
※
Housing Monitor is manufactured using hard coat acrylic. When cleaning use a clean soft
cloth taking care not to scratch it.
SPECIFICATIONS
Compatible Camera Canon PowerShot G1X Mark II
Maximum Depth
100 meters (328 feet)
Material
Housing: Corrosion-resistant aluminum alloy, anodized
Lever, Buttons, Dials: POM, PC
Lens, Flash & LCD Window: Hard Coat Acrylic
Screws, Springs, Shafts: Stainless Steel, Galvanized
Size (Housing)
Dimensions: W158 x D152.6mm x H110.5mm
Weight: Approx. 1240g (Land) / 430g (Freshwater w/camera)
9.
